1 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 description features 5v/3.3v 1:2 differential fanout buffer pin names pin function d data inputs q 0 , q 1 data outputs precision edge ? sy10el11v sy100el11v 3.3v and 5v power supply options 265ps propagation delay 5ps skew between outputs high bandwidth output transitions internal 75ky input pull-down resistors replaces sy10/100el11 improved output waveform characteristics available in 8-pin soic package the sy10/100el11v are 1:2 differential fanout gates. these devices are functionally similar to the e111a/l devices, with higher performance capabilities. having within-device skews and output transition times signifcantly improved over the e111a/l, the el11v is ideally suited for those applications which require the ultimate in ac performance. the differential inputs of the el11v employ clamping circuitry to maintain stability under open input conditions. if the inputs are left open (pulled to v ee ), the q outputs will go low. rev.: i amendment: /0 issue date: may 2010 precision edge ? precision edge is a registered trademark of micrel, inc.
2 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 package/ordering information ordering information (1) package operating package lead part number type range marking finish sy10el11vzc z8-1 commercial hel11v sn-pb sy10el11vzctr (2) z8-1 commercial hel11v sn-pb sy100el11vzc z8-1 commercial xel11v sn-pb sy100el11vzctr (2) z8-1 commercial xel11v sn-pb sy10el11vzi z8-1 industrial hel11v sn-pb sy10el11vzitr (2) z8-1 industrial hel11v sn-pb sy100el11vzi z8-1 industrial xel11v sn-pb sy100el11vzitr (2) z8-1 industrial xel11v sn-pb sy10el11vzg (3) z8-1 industrial hel11v with pb-free pb-free bar-line indicator nipdau sy10el11vzgtr (2, 3) z8-1 industrial hel11v with pb-free pb-free bar-line indicator nipdau sy100el11vzg (3) z8-1 industrial xel11v with pb-free pb-free bar-line indicator nipdau sy100el11vzgtr (2, 3) z8-1 industrial xel11v with pb-free pb-free bar-line indicator nipdau notes: 1. contact factory for die availability. dice are guaranteed at t a = 25c, dc electricals only. 2. tape and reel. 3. pb-free package is recommended for new designs. 8-pin soic (z8-1) 1 2 3 4 5 6 7 8 q 0 q 1 v cc d v ee d q 0 q 1
3 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 symbol rating value unit v cc power supply voltage (v ee = 0) +6.0 to 0 v v ee power supply voltage (v cc = 0) C6.0 to 0 v v in input voltage (v cc = 0v, v in not more negative than v ee ) C6.0 to 0 v input voltage (v ee = 0v, v in not more positive than v cc ) +6.0 to 0 v i out output current Ccontinuous 50 ma Csurge 100 t lead lead temperature range (soldering, 20sec.) +260 c t a operating temperature range C40 to +85 c t store storage temperature range C65 to +150 c ja thermal resistance (junction-to-ambient) Cstill air 160 c/w C500lfpm 109 c/w jc thermal resistance (junction-to-case) 39 c/w esd mil std. 883 human body model, all pins >1.5k v note 1. permanent device damage may occur if absolute maximum ratings are exceeded. this is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. absolute maximum ratings (1) 10k series dc electrical characteristics (1) v cc = 3.3v +10%; v ee = 0v t a = C 40c t a = 0c t a = +25c t a = +85c symbol parameter min. max. min. max. min. max. min. max. unit v oh output high voltage C1080 C890 C1020 C840 C980 C810 C910 C720 mv v ol output low voltage C1950 C1650 C1950 C1630 C1950 C1630 C1950 C1595 mv v ih input high voltage C1230 C890 C1170 C840 C1130 C810 C1060 C720 mv v il input low voltage C1950 C1500 C1950 C1480 C1950 C1480 C1950 C1445 mv i ih input high current 150 150 150 150 a i il input low current 0.5 0.5 0.5 0.3 a t a = C40c t a = 0c to +85c symbol parameter min. typ. max. min. typ. max. unit conditions v oh output high voltage C1085 C1005 C880 C1025 C955 C880 mv v in = v ih (max) v ol output low voltage C1830 C1695 C1555 C1810 C1705 C1620 or v il (min) v ih input high voltage (3) C1165 C880 C1165 C880 mv v il input low voltage (4) C1810 C1475 C1810 C1475 mv i ih input high current 150 150 a i il input low current 0.5 0.5 a v in = v il (min) 100k series dc electrical characteristics (2) v cc = 3.3v +10%; v ee = 0v
4 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 10k series dc electrical characteristics (1) v cc = 5.0v +10%; v ee = 0v t a = C 40c t a = 0c t a = +25c t a = +85c symbol parameter min. max. min. max. min. max. min. max. unit v oh output high voltage C1080 C890 C1020 C840 C980 C810 C910 C720 mv v ol output low voltage C1950 C1650 C1950 C1630 C1950 C1630 C1950 C1595 mv v ih input high voltage C1230 C890 C1170 C840 C1130 C810 C1060 C720 mv v il input low voltage C1950 C1500 C1950 C1480 C1950 C1480 C1950 C1445 mv i ih input high current 150 150 150 150 a i il input low current 0.5 0.5 0.5 0.3 a t a = C40c t a = 0c to +85c symbol parameter min. typ. max. min. typ. max. unit conditions v oh output high voltage C1085 C1005 C880 C1025 C955 C880 mv v in = v ih (max) v ol output low voltage C1830 C1695 C1555 C1810 C1705 C1620 or v il (min) v ih input high voltage (3) C1165 C880 C1165 C880 mv v il input low voltage (4) C1810 C1475 C1810 C1475 mv i ih input high current 150 150 a i il input low current 0.5 0.5 a v in = v il (min) 100k series dc electrical characteristics (2) v cc = 5.0v +10%; v ee = 0v
5 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 t a = C40c t a = 0c to +85c symbol parameter min. typ. max. min. typ. max. unit conditions v oh output high voltage C1085 C1005 C880 C1025 C955 C880 mv v in = v ih (max) v ol output low voltage C1830 C1695 C1555 C1810 C1705 C1620 or v il (min) v ih input high voltage (3) C1165 C880 C1165 C880 mv v il input low voltage (4) C1810 C1475 C1810 C1475 mv i ih input high current 150 150 a i il input low current 0.5 0.5 a v in = v il (min) 100k series dc electrical characteristics (2) v cc = 0v; v ee = -3.3v +10% 10k series dc electrical characteristics (1) v cc = 0v; v ee = -3.3v +10% t a = C 40c t a = 0c t a = +25c t a = +85c symbol parameter min. max. min. max. min. max. min. max. unit v oh output high voltage C1080 C890 C1020 C840 C980 C810 C910 C720 mv v ol output low voltage C1950 C1650 C1950 C1630 C1950 C1630 C1950 C1595 mv v ih input high voltage C1230 C890 C1170 C840 C1130 C810 C1060 C720 mv v il input low voltage C1950 C1500 C1950 C1480 C1950 C1480 C1950 C1445 mv i ih input high current 150 150 150 150 a i il input low current 0.5 0.5 0.5 0.3 a
6 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 10k series dc electrical characteristics (1) v cc = 0v; v ee = -5.0v +10% t a = C 40c t a = 0c t a = +25c t a = +85c symbol parameter min. max. min. max. min. max. min. max. unit v oh output high voltage C1080 C890 C1020 C840 C980 C810 C910 C720 mv v ol output low voltage C1950 C1650 C1950 C1630 C1950 C1630 C1950 C1595 mv v ih input high voltage C1230 C890 C1170 C840 C1130 C810 C1060 C720 mv v il input low voltage C1950 C1500 C1950 C1480 C1950 C1480 C1950 C1445 mv i ih input high current 150 150 150 150 a i il input low current 0.5 0.5 0.5 0.3 a t a = C40c t a = 0c to +85c symbol parameter min. typ. max. min. typ. max. unit conditions v oh output high voltage C1085 C1005 C880 C1025 C955 C880 mv v in = v ih (max) v ol output low voltage C1830 C1695 C1555 C1810 C1705 C1620 or v il (min) v ih input high voltage (3) C1165 C880 C1165 C880 mv v il input low voltage (4) C1810 C1475 C1810 C1475 mv i ih input high current 150 150 a i il input low current 0.5 0.5 a v in = v il (min) 100k series dc electrical characteristics (2) v cc = 0v; v ee = -5.0v +10% notes: 1. 10el circuits are designed to meet the dc specifcations shown in the table after thermal equilibrium has been established. the circuit is in a test socket or mounted on a printed circuit board and transverse airfow greater than 500lfpm is maintained. outputs are terminated through a 50? resistor to C2.0v except where otherwise specifed on the individual data sheets. 2. this table replaces the three tables traditionally seen in ecl 100k data books. the same dc parameter values at v ee = C4.5v now apply across the full v ee range of C4.2v to C5.5v. outputs are terminated through a 50? resistor to C2.0v except where otherwise specifed on the individual data sheets. 100k circuits are designed to meet the dc specifcations shown in the table where transverse airfow greater than 500lfpm is maintained. 3. guaranteed high signal for all inputs. 4. guaranteed low signal for all inputs.
7 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 t a = C40c t a = 0c t a = +25c t a = +85c symbol parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. unit t plh propagation delay to 135 260 385 185 260 335 190 265 340 215 290 365 ps t phl output d t skew within-device skew (2) 5 5 20 5 20 5 20 ps duty cycle skew (3) 5 5 20 5 20 5 20 t jitter random clock jitter (rms) 0.6 ps v pp minimum input swing (4) 150 150 150 150 mv v cmr common mode range (5) C1.3 C0.4 C1.4 C0.4 C1.4 C0.4 C1.4 C0.4 v t r output rise/fall times q 100 225 350 100 225 350 100 225 350 100 225 350 ps t f (20% to 80%) ac electrical characteristics (1) v ee = v ee (min.) to v ee (max.); v cc = gnd notes: 1. parametric values specifed at: 10/100el11v series: -3.0v to -5.5v. 2. within-device skew defned as identical transitions on similar paths through a device. 3. duty cycle skew is the difference between a tplh and tphl propagation delay through a device. 4. minimum input swing for which ac parameters are guaranteed. the device has a dc gain of 40. 5. the cmr range is referenced to the most positive side of the differential input signal. normal operation is obtained if the high level falls within the specifed range and the peak-to-peak voltage lies between vpp min. and 1v. the lower end of the cmr range varies 1:1 with vee. the numbers in the spec table assume a nominal vee = C3.3v. note for pecl operation, the vcmr (min) will be fxed at 3.3v C |vcmr (min)|.
8 sy10el11v sy100el11v micrel, inc. m9999-052610 hbwhelp@micrel.com or (408) 955-1690 8-pin soic .150" wide (z8-1) micrel, inc. 2180 fortune drive san jose, ca 95131 usa t e l + 1 (408) 944-0800 f a x + 1 (408) 474-1000 w e b http://www.micrel.com the information furnished by micrel in this datasheet is believed to be accurate and reliable. however, no responsibility is assumed by micrel for its use. micrel reserves the right to change circuitry and specifcations at any time without notifcation to the customer. micrel products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a signifcant injury to the user. a purchasers use or sale of micrel products for use in life support appliances, devices or systems is at purchasers own risk and purchaser agrees to fully indemnify micrel for any damages resulting from such use or sale. ? 2003 micrel, incorporated. package notes: note 1. package meets level 1 moisture sensitivity.
|
